Ads
WESTLAND INCINERATOR CO. LTD.
- Phone:
- 780-447-5052 (+1-780-447-5052)
- Fax:
- 780-447-4912 (+1-780-447-4912)
- City/Area:
- Alberta
- Country:
- Canada
- Email:
- [email protected]
- Webiste:
- www.westlandincinerator.com
Company Profile
WESTLAND INCINERATOR CO. LTD. is a company at CANADA,Fax is 780-447-4912 (+1-780-447-4912),Address is 20204-110th Ave. NW EDMONTON, Alberta T5S 1X8
- Address: 20204-110th Ave. NW EDMONTON, Alberta T5S 1X8
- City/Area: Alberta
- Country: Canada
- Contact Person: Bill Vriens
- Position: Sales
- Product list: 333990 - All Other General-Purpose Machinery Manufacturing
- Category: 333990 - All Other General-Purpose Machinery Manufacturing
- Employees: 26
- Type: Manufacturer/Processor/Producer
- establish Year: 1984
- Profile: Westland’s innovations and advantages In addition to complying with the basic design criteria, Westland, through its extensive R&D efforts, has successfully developed the following main features and the corresponding advantages over the specified “acceptable materials”: Flame-port air entry design. The mixing between the flame-port air and the combustible gases generated in the primary chamber is so efficient that less than 2-second of residence time in the secondary chamber is sufficient to produce combustion efficiencies > 99.99%, and DRE’s > 99.9999% for certain chlorinated organic compounds. ,Control of oxygen concentration in the secondary chamber. A proprietary control algorithm has been developed which (a) eliminates the generation of “black smoke” (a common problem with batch-fed incinerators), (b) minimizes the use of auxiliary fuel, (c) maximizes incinerator capacity by prompting the operator when the incinerator is ready for the next batch.Compact, efficient and trouble-free scrubber design. Quenching from 1200 C to ~ 80 C, removal of particulate matter and acid gases (results presented later) and mist/droplet elimination are consistently achieved in one integrated unit, thus eliminating the need for three separate components. Clogging potential is also eliminated, thereby allowing the use of lime as the scrubbing medium. This simplifies operation and lowers operating cost. Westland Incinerator System offers technical and cost advantages. Westland Incinerator System complies fully with the specified basic design criteria: dual-chamber, starved-air incineration and wet scrubbing with a venturi. Proven Performance in Air Emissions The design of the Westland Incinerator System was based on the Alberta Research Council’s incinerator pilot plant. Regulatory and other tests have been carried out by independent consultants on both systems to demonstrate that the system is capable of meeting strict incinerator standards and guidelines for large incinerators.1,2, Highlights of the results that are summarized below Summary of Air EmissionsPollutantConcentration*CCME Particulate Matter (PM)4.9 a - 12.3 20 Hydrochloric acid (HCl)3.075 Sulphur dioxide (SO2)11.0260 Nitrogen oxides (NOx as NO2)144.7400 Carbon Monoxide (CO)3.957 Dioxins and Furans a, b ng(TEQ)/m30.060.5 Notes: * Concentration in mg/m3 (except for dioxins and furans) with the following reference conditions: dry, 25 C, 101.3 kPa, and 11% O2; a: emission polishing unit used ; b: results are below detection limits; the value shown corresponds to an assumption that every homologue is present at half of its detection limit. The performance of Westland Incineration System is proven and well documented in technical publications and reports.
Map
This is Google map of WESTLAND INCINERATOR CO. LTD. address:20204-110th Ave. NW EDMONTON, Alberta T5S 1X8,Alberta,Canada.
If you find 'Can Not Find' or error address, please submit another address using the form in the map, then search again.
If you find 'Can Not Find' or error address, please submit another address using the form in the map, then search again.